What is Service mode on Sharp TV ? How to turn ON ?

Facing non-stop issues on your Sharp TV? No Signal, Grainy screens, or Blinking display while watching content. All these can be major issues with your internal settings on the TV. When common troubleshooting doesn’t work, a Factory Reset is suggested. The Service mode on Sharp TV is a secret menu that enables advanced settings, improved performance, and Factory resetting of your TV.Go through the guide to know How to access it on different models and customize features.

What is Service mode on Sharp TV ? How to turn ON ?

What is the Service mode on Sharp Smart TV?

The Service mode on Sharp Smart TV is a menu on the devices that is used to diagnose errors and problems with your device. The mode allows users to access control, get advanced settings, and make the viewing better. The service mode can also be termed the engineer mode or maintenance mode. Whenever there is a major issue with the TVs you bring to the technician, they Turn ON the Service mode to not lose existing content. And thereby internally carrying out the Repairing process.

Can I turn on Service mode on Sharp TV? 

Yes, You can use the Service mode on Sharp TV. The Service menu which you can also easily understand by the term – Factory mode on Sharp TV. If you are facing several unsolved issues on your Sharp TV, This mode can be a help to you.

The majority of the  LCD and LED TVs include a service menu in order to make internal settings changes. However, the methods and keys to access the Service menu on Sharp TV vary based on the different TV Models.

You can also know What is the Store mode on Sharp TV.

How to turn on Service mode on Sharp TV?

In case, you are facing errors on your TV such as Grey Screen, Blinking, and Grainy Sharp TV Screens. The Last option to solve is the Hard Reset, Factory Reset, or Service mode on your Sharp TV. It is quite a risky task to do as anything wrong can lead to removing your existing TV Settings. Make sure to be careful while using the Service mode on Sharp TV.

There are plenty of ways to turn on and enable to enter the Service mode/menu on your Sharp TV. For Sharp LCD, LEDs, and much more, the key combinations will vary, Some common methods are given below;

  • Use the TV Remote and the Physical buttons on your TV.
  • Use of Service menu Codes.
  • Remote Shortcuts.
  • External Volume buttons.

NOTE: It is mandatory that you have an original Sharp TV Remote to enter the Service menu. Not all methods can be done with the Physical buttons on TV.

Service mode on Sharp LCD TVs 

What is Service mode on Sharp TV

  • Keep the LCD TV on and Unplug it from the Power Cable.
  • Now Press the INPUT button and Vol – on your remote.
  • Plug your TV all back on the cable.
  • You will see a “k” appearing in brackets on the screen.
  • Now, Use the Physical button on your TV, Press hold both the Vol- and CH – buttons.
  • Release when The Service menu appears.

For Older LCD Models 

  • Press Menu and Then the Right arrow on your TV Remote.
  • Arrow down and Select Sound Settings. Press the Arrow Right and choose Advanced Audio Settings.
  • Go to the Balance section and Set it to 0.
  • Now, Enter 1969 – menu will be exited. A Green M will appear.
  • Again Press Menu and access the Service menu. A Yellow Factory tab at the top will appear too.

Service menu on Sharp CRT TVs 

  • Unplug your TV, and Press Hold the VOL- and CH+ Buttons.
  • Then Plug in the TV back. Your Sharp CRT TV will turn by entering the Service menu.

Once Service mode on Sharp TV is enabled, You can use the CH+ and CH- Buttons to Navigate. And use VOL+ and VOL – to adjust the Values.

Using Service Menu Codes on Sharp TV

If the above methods do not work for your Sharp TV. You can try the Menu Codes for entering the service menu on LCD Sets (Older). These codes are different for every model, refer to the manual for more details.

What is Service mode on Sharp TV

  • Press  Menu and Press the 1147 buttons.
  • or Press menu and 1999 or 3481 or 4725.
  • Entering any of these number sequences, you can access the Service menu.
  • To exit, Power off your TV.

Play games by Turning on Game Mode on Sharp TV

Enter Service mode on Sharp  AQUOS TV

  • During reset, Press the INPUT or  CH-Up + and Vol-down – buttons. (Use the Physical buttons on your TV). Enter the SERVICE Key to enable or disable it.

There are 4 modes on the Service mode that you can choose according to your requirements.

Adjustment mode, Setting mode, Check mode, and Option mode.

Once you have turned on the Service mode, make sure to check these settings;

  • Disable AFT Processing, Energy saving is off, User data set to default, FAO and Speaker user settings are on and off. Sleep and View timers are disabled too.

You can also Open the Service mode on Sharp TV Roku, by opening the Secret menu through Key combinations.,

NOTE: Repairing your TV from any internal software damage is a tech-savvy task. So, It is better recommended to have technical help while performing or removing the panels on TV.

Bottom Line 

I hope you have understood What is Service mode and How to turn it ON on your Sharp TV. In case,  The errors on your TV continue to occur even after enabling the mode and factory reset. Contact Sharp TV Customer Care and get some technical support. When the condition is worse, use your TV Warranty (if available) to get it repaired -Pocket-friendly.

Scroll to Top